Flexible LED Arrays by Radiantz with AMBER LEDs.
In CLEAR or SMOKED Tubing

Click here to purchase RED Flexible Arrays

The possibilities are endless....Use them as brake/running/turn signals, third brake lights on trunks and TourPaks,360 degree turn signals wrapped around your forks, or as ultra bright LED accent lights.
                       Can be flexed in an arc as pictured below but not side to side.

Features:
- 120 degree viewing angle for wider visability.
- 1mm spacing between LED's.
- Flexible "D" channel tube that is only .325 thick by .325 wide.
- Industrial strength double side mounting tape on back.
- 24 gauge teflon coated wire leads.
- Draws less than .2 amps per foot.
- Input voltage of 12-15 Volts DC.
- Can be used as Running & Turn Signal by adding a Dual Element Circuit

Installation:
Click here to learn how to properly bend a Flexible Array
Installs easily with supplied double sided 3M tape (attached to back of fixture at factory).
3M Promoter Pad included with order.
Must be warmed using a heatgun on LOW setting for proper bending.
Requires silicone sealing prior to installation.

Click here to see pictures of Flex Arrays on various bikes

Lengths and sizes:
5 LED - 1.500" long (2 per package)(*Note: Not extremely flexible due to length*)
10 LED - 2.125" long (sold each)
15 LED- 2.750" long (sold each)
20 LED - 3.250" long (sold each) 
25 LED - 3.937" long (sold each) 
30 LED - 4.500" long (sold each) 
40 LED - 5.700" long (sold each)
50 LED - 6.900" long (sold each)
55 LED - 7.500" long (sold each) 

For Custom Built Arrays, click here to contact us for a quote.